Description
The Swift metal rat trap uses a powerful snap mechanism that stores energy in a tensioned spring, releasing when the trigger is disturbed and driving a kill bar across the striking plate. This all-metal construction uses galvanised steel throughout — no wood to absorb moisture or plastic to become brittle in cold. The metal base won't warp in damp locations, the spring maintains tension over time, and the galvanised coating prevents rust when used outdoors or in wet areas such as farm buildings, drains and compost areas.
The trigger mechanism uses a simple treadle plate positioned over the bait pedal. When a rat climbs onto the plate to access bait, the pressure releases the spring and the kill bar snaps forward. The spring force is calibrated for rat body mass — significantly stronger than mouse trap springs to ensure reliable dispatch. The metal striking surface covers the full width of the base, leaving no gaps where a rat might avoid contact.
To set the trap, pull the kill bar back past vertical until it locks behind the trigger plate. Apply a small amount of bait (peanut butter, chocolate spread or bacon grease work well) to the raised pedal. Position traps perpendicular to walls where you've seen droppings or gnaw marks, with the trigger end facing the wall. Rats typically follow established routes along edges, so wall placement intercepts their travel paths.
The all-metal design allows the trap to be cleaned and reused indefinitely. Rinse with hot water after each catch before resetting. For outdoor or agricultural use where traps may face continuous weather exposure, the galvanised finish withstands years of rain and frost without degrading.
Key Features:
All-metal construction — galvanised steel base, spring and kill bar with no wood or plastic components
Weather-resistant finish — galvanised coating prevents rust in damp or outdoor environments
Rat-calibrated spring — heavier spring force designed for larger rodents
Swift Snap mechanism — traditional treadle trigger releases the spring-loaded kill bar when disturbed
Dimensions (approx):
15cm x 8cm
Contents:
1 x Metal Rat Trap
